ProScan PSB4888 Manuel Du Propriétaire page 6

Troubleshooting guide:
No power
Check the connection of the AC/DC adaptor between the unit and wall outlet
No sound
Check that the volume control is not at minimum
Check that mute is not set on the remote control
The Remote control is not working
Replace the batteries
Make sure there are no obstacle obscuring the front of the
The power light is on when power on, but no sound
Press the power button on the remote to ensure the soundbar is not in standby mode
Press the input button on the remote to switch between AUX and Bluetooth in case
you're in the wrong mode
Intermittent Bluetooth
For the best signal transmission please ensure your PROSCAN soundbar is located 4
meters away from microwave ovens & Wi-Fi routers as this can interfere with the signal
Specifications:
Speakers:
Output sound press:
Frequency response:
Remote control system:
Adapter input:
Power output:
Standby power:
Sound bar size:
Gift box:
Package size:
50mmx6+Tweeterx2/20Wx2
88dB
80-20KHz
infrared
AC100V-AC240V 50Hz/60Hz 0.6A Max
24V 1.5A
<0.5W
L1200xW97xH70mm
L1250xW186x122mm
L1260xW383x136mm
PROSCAN soundbar