Publicité
Les langues disponibles
Les langues disponibles
After this setting, briefly press
setting interface of backlight brightness.
• Display Backlight Brightness
When the speed field displays bL1, press
figure between 1 and 5. The figure 1 represents the lowest
brightness while 5 indicates the highest display backlight
brightness. After this setting, briefly press (< 0.3 seconds) to
enter the setting interface of automatic off time.
• Automatic Off Time
When the speed field displays OFF, press
figure between 1 and 9. The figures indicate the minutes that it
takes to automatically shut down the display. After this setting,
briefly press (< 0.3 seconds) to enter the setting interface of
maintenance warning.
DISPLAY MANUAL DP C10.UART
(< 0.3 seconds) to enter the
/
to choose a
/
to choose a
• Maintenance Warning (can be deactivated)
When the speed field displays nnA, press
0 or 1. 0 disables the function while 1 enables it.
1) The display will prompt maintenance necessity based on such
information as the accumulated riding distance and the battery
charge cycles.
2) When the accumulated total riding distance exceeds 5,000 km
(can be customized by the manufacturer), the display will show
the symbol
. When the display is started up, the sign for
accumulated riding distance will flash for 4 seconds, indicating
that maintenance is necessary.
3) When the number of battery charge cycles exceeds 100 (can
be customized by the manufacturer), the display will the symbol
. When the display is started up, the sign for battery will
flash for 4 seconds, indicating that maintenance is necessary.
4) The maintenance alert function can be disabled: settings
->maintenance alert (MA) -> 0. (Maintenance alert can also be
set via a computer. This requires a USB connection. See also the
parameter setting instructions).
/
to choose either
11
Publicité
