Health And Safety; Warranty Conditions - Sagola Rc1 Manuel D'utilisation

an Elcometer company

11. Health and Safety

Keep the working area clean and free of potentially dangerous waste (thinners, rags, etc...).
While work is in progress, there must not be any source of ignition (naked flames, lighted
cigarettes, etc.) in the working area as these might generate easily flammable gases.
Likewise, the approved protective means must be used (breathing, hearing, etc.) in
accordance with the regulations established in this regard.
If the unit is used in an inadequate manner or its components are altered in any way severe material
damage may occur and bodily harm may be caused to the operator, other personnel and/or animals and
may even cause death. SAGOLA S.A.U. accepts no responsibility in for any damage caused through
the incorrect use of the unit.
Always use approved breathing units in accordance with current Standards and Regulations in order to
protect yourself from emissions produced during application.
As a general, preventive measure we advise you to wear goggles in accordance with the specific
environmental regulations and characteristics for the work centre.
Wear gloves when handling the product (see the manufacturer's recommendations) and clean the
regulator.
Use Sagola antistatic hoses to eliminate possible electrical
discharges that might create the risk of fire or explosion.
The use of solvents and/or detergents that contain halogenated
hydrocarbons (trichloroethane, methyl chloride, etc.) For this
reason, these components may rust and in extreme cases the
chemical reaction caused may be explosive. We recommend you to
use products that do not contain the aforementioned components.
Do not use acids, soda (alkalis or pickling substances, etc.) for
cleaning under any circumstances.

12. Warranty Conditions

This device has been manufactured with great precision and has been subjected to a large number of
controls before leaving the factory.
The WARRANTY is valid for 3 years, counted as of the date of purchase, which will be indicated by the
seller in the place provided for this purpose, together with his stamp. Once the unit has been received,
please complete the warranty and send this to the manufacturer for validation
This WARRANTY covers any manufacturing defect, which will be repaired without charge. However, any
malfunction resulting from the incorrect use of the unit, such as inadequate connections, breakage due to
dropping, or similar, the normal wear of components and in general any deficiency not attributable to the
manufacturer of the device, are expressly excluded. Likewise, the WARRANTY shall be rendered null and
void when it is evident that the unit has been handled by persons other than our Technical Assistance Service.
This WARRANTY does not support any undertaking made by anyone outside our Technical Service.
In the case of any breakdown during the guarantee period, please attach the completed warranty certificate
to the unit and deliver this to the nearest Technical Assistance Service or get in touch with the factory.
Any demand of greater importance against the supplier, in particular compensation for damages, is
excluded. This is also applicable to any damages that might arise during counselling, while acquiring
practice and during demonstration.
Consequently, the services rendered under guarantee do not involve an extension of the warranty period.
The manufacturer reserves the right to make technical modifications.
EN 16
www.sagola.com