Start Up; Cleaning; Parts List - Sagola Rc1 Manuel D'utilisation

08. Start up

Connect the air flow regulator to the spray gun air inlet and close
the air passage completely by turning the regulator control as far
as it will go.
Connect the air hose to the air flow regulator.
Turn the regulator anticlockwise until the required pressure is
obtained, without releasing the trigger.

09. Cleaning

In order to carry out maintenance, repairs or cleaning, first disconnect the unit from the
compressed air distribution network.
It must not be in washing machine or be submerged in solvent.
In order to clean the spray equipment, disassemble the pressure regulator. Remove any remains
of paint with a clothe soaked in solvent and try to dry quickly. Do not use solvent to clean the
pressure gauge.
Please also observe the cleaning instructions for your SAGOLA spray gun.
DO NOT USE ACIDS, LYES, PICKLING AGENTS, UNSUITABLE
RECLAIMED MATERIALS OR OTHER AGGRESIVE CLEANING
MEDIA, SUCH AS TOLUOL, FOR EXAMPLE!

10. Parts list

No. Code
01 56415409
02 54550009
www.sagola.com
U.
1
1
an Elcometer company
Connect
Disconnect
EN 15