Asus PB62 Manuel D'utilisation page 40

To install an M.2 SSD to the bottom M.2 slot
1. Remove the following items before proceeding:
2.5" Storage bay
Heatsink and fan
module
2. Remove the configurable port by removing the three (3) screws
securing it, then lifting it out of the chassis.
3. Disconnect the speaker cable.
4. Remove the remaining five (5) screws securing the motherboard to
the chassis.
40 ASUS Mini PC PB62
Please refer to steps 1 - 2 under the Installing
2.5" HDD or SSD section to remove the 2.5"
storage bay.
Please refer to steps 1 - 2 under the Installing
the CPU section to remove the heatsink and
fan module and cables.