Calf Support; Adjusting The Recline Position; Raincover - Nitty-Gritty Cosatto Air Travel System Mode D'emploi

Table des Matières
Pushchair mode
41
In pushchair mode, the seat unit can be fitted either rearward or forward facing.
42
Preparation
Remove the seat unit from the chassis 21 (1).
Locate (2) and connect (3) the seat base strap on the underside of seat unit.
43
Open the harness 22 and remove chest pad, crotch pad, headhugger & footmuff liner (4).
Refit chest pad, crotch pad & headhugger then close the harness 23 (5).
Pull back the hood fabric section (6).
Refit the seat unit to the chassis 20 (7) .

Calf support

44
Opening

Adjusting the recline position

45
Footmuff
46
Preparation
Remove head section from the footmuff liner (1).
Attach front bucket to the footmuff liner (2).
47
Fitting
Open the harness 22 and remove the chest pads, crotch pad & headhugger (1).
Push the harness straps through the footmuff (2).
Attach the footmuff fabric fasteners to the rear of the backrest (3).
Refit the chest pads, crotch pad & headhugger (4) then close the harness 23 .

Raincover

48
Fitting
49
Using access zip
Table des Matières
loading

Table des Matières