Setting The Clock; Assembling The Burner Parts; Flame Characteristics; Oven Operation - Bosch HDIP056U Manuel D'utilisation

Masquer les pouces Voir aussi pour HDIP056U:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

en-us Oven operation
Switch off the appliance after the specified cooking
5.
time.
Wait until the oven cavity has cooled down.
6.
Clean the smooth surfaces with soapy water and a dish
7.
cloth.
Clean the accessories using soapy water and a dish
8.
cloth or soft brush.
a There may be a slight odor during first uses. This is nor-
mal and will disappear.
6.2 Setting the clock
Requirement: The oven is in standby mode.
Press Settings.
1.
a The display shows "SET CLOCK".
Press enter.
2.
Use the numeric keypad to enter the desired time.
3.
The numbers fill in from right to left. To enter 10:45,
type 1, 0, 4, 5.
Press enter.
4.
6.3 Assembling the burner parts
Ensure that the burner parts are clean and dry.
1.
6.4 Flame characteristics
The color of the flame tells you if the gas supply is properly adjusted.
Note: Allow the appliance to operate for 4 to 5 minutes before evaluating the flame. Some yellow streaking is normal dur-
ing the initial startup.
Flame
Completely or mostly
yellow
Yellow tips on outer
cone
Soft blue
7 Oven operation

Oven operation

Here you will find out everything you need to know about
Oven operation
operating your oven.
7.1 Setting the heating mode and tempera-
ture
Press the button for the desired heating mode.
1.
a The heating mode and the default temperature are dis-
played.
20
Image
Ensure that the individual parts of the burners are fitted
2.
in their exact position and are straight; otherwise, this
may result in ignition problems or problems during oper-
ation.
Fit the burner head and the burner ring in such a way
3.
that the locking catches on the lower section of the
burner click into place in the corresponding recesses.
Measure
Verify that the regulator is set for the correct fuel. Retest af-
ter adjustment.
Normal for LP gas
Normal for natural gas
a The temperature flashes to show it can be edited.
If desired, enter a temperature using the numeric key-
2.
pad.
Press Enter.
3.
a The oven begins to preheat. The "preheating" is dis-
played and the preheat bar
set temperature is reached.
7.2 Turning the oven off
Press Oven Clear/Off.
a The oven turns off and the clock is displayed.
begins to fill up until the

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Hdip056cHdi8056uHdi8056c

Table des Matières