Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Speed setting button: press this button to select the desired speed: low = low ;medium
= middle ; fast : high.
Oscillation function (=Swing): Press this button, the head shaking function can be
adjusted, the button indicator light lights up; press this button again, the head stops
shaking.
Timer: Press this button to select the operating time ;the timer button indicator lights
up. The fixed duration will be between 0.5h and 7.5h max, in 1/2h steps.
Mode: Press this button to select the ventilation mode: normal, natural (=Natural) or
night (=Sleep).
Remote control operating instructions
1.
When using the remote control for the first time, remove the insulating sheet from
the back of the remote control.
2.
The remote control's range of application is less than 5 m from the receiver. If the
remote control does not face the receiver, its range of application will be reduced.
3.
The remote control must face the receiver (the receiver is located on the control
panel).
4.
There must be no barrier between the receiver and the remote control.
CLEANING AND MAINTENANCE
Switch off and disconnect the unit from the socket before assembly or disassembly.
Clean only the outside of the fan with a soft, dry cloth.
Do not immerse the fan in water or any other liquid, also protect it from possible water
splashes.
Do not use solvents or any other chemical products for cleaning.
After cleaning, if you do not use the fan, please store it in a dry place.
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V~, 50-60 Hz
Power: 40W
Class II
ERP INFORMATION :
Description
Maximum Flow rate
Power consumption
Service value
Power consumption in
002191
Symbol
Value
F
36.7
P
SV
0.918
PSB
13/28
40
(m3/min)/W
0
Unit
m3/min
W
W
Publicité
Table des Matières
