Saneo BFT1803R Manuel D'utilisation page 10

- Never immerse the unit and its power cord in water or any other
liquid.
-Never connect the unit with wet or damp hands as this may cause
an electric shock.
-Before use, please check that the product, its cable and plug are
not damaged.
- Before first use, be sure to remove all parts of the packaging that
could affect the proper functioning of the product.
- Before connecting the product, make sure that the start button is
set to "off".
-Always disconnect the unit after use to avoid overheating.
-Do not bend and pull the cable. Never move the unit by pulling the
power cord. Do not place the cable on an abrasive or cutting
surface or in a position that could damage it.
-Do not block all or part of the air inlets and do not insert objects
into them.
-During operation, do not touch the product if you are wet.
-If you notice any malfunction in the operation of the unit, turn off
and unplug the unit immediately.
- Never leave the appliance unattended within reach of children,
whether it is running or not.
-Ensure that the fan is switched off from the supply mains before
removing the guard.
- Always turn off and unplug your device after use and before
cleaning it.
- Your appliance is intended for domestic use inside your home.
- Do not suspend the fan from walls or ceilings.
- Place this fan at a distance from surrounding objects to ensure
that the operation of the fan does not cause accidental damage.
-Do not cover the fan during operation.
- Do not leave this fan unattended.
-For detailed explanations on how to install your fan, refer to the
corresponding paragraphs.
10/28