Publicité
Les langues disponibles
Les langues disponibles
Measuring Current with External 24V Supply
1.
Ensure that the measurement lead is disconnected from the device
under test.
2.
Press the MEASURE/SOURCE button to switch the device to the
measurement state. The display will show the "MEASURE" indicator,
confirming the device is ready for measurement.
Press the FUNC button to switch to the DC current
3.
measurement function.
4.
The "mA" and "LOOP" characters will light up on the display
screen simultaneously, indicating that the device is in DC current
measurement mode with loop power.
5.
Connect the measurement leads to the measurement terminals of the
equipment under test, ensuring correct polarity.
6.
The real-time current measurement value will be displayed in the
main display area of the screen.
Note: This function provides a 24V power supply for the external
equipment loop while simultaneously measuring the current in the loop.
1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com
REED Instruments
Publicité
