How To Pair Wireless Bt Receiver; Troubleshooting - Pyle Pfa560Bteu Manuel D'utilisation

HOW TO PAIR WIRELESS BT RECEIVER

The system has built in Wireless BT receiver.
If you are pairing the Wireless BT from a mobile phone for the rst time, Open
the system and press the
Then search for the Wireless BT sender (Device ID: PyleUSA) by your own
Wireless BT sender (mobile phone).
If the system have been paired already with the Wireless BT sender, the next
time you pair will be automatic.
After that you can enjoy music by the Wireless BT receiver. The system will turn
to normal working state if theres no pairing in 10 minutes.

TROUBLESHOOTING

PROBLEM
The system has no power
No sound at all
Either of the main channels
has no sound
Abnormal LED screen display
key on the remote and the LED will show "pair".
~ The AC adapter is connected incorrectly.
~ The socket has no power
~ Incorrect selection of input signal.
~ If mute state is turned on.
~ Sound source machine is not powered.
~ The signal plug is connected incorrectly or
lines had short-circuit.
~ It may be a ected by exterior strong disturbance,
turn o
~ Avoid direct sunlight/heat.
California Prop 65 Warning
WARNING:
This product may expose you to chemicals, which is known to
the state of California to cause cancer, birth defects and other
reproductive harm. Do not ingest.
For more info go to: www.P65warnings.ca.gov
POSSIBLE REASONS / SOLUTIONS
rst and turn on again
www.PyleUSA.com
9