Publicité
Les langues disponibles
Les langues disponibles
4. When the room temperature reaches a comfortable level, slowly turn thermostat
counter-clockwise until the thermostat shuts off (you will hear a faint "click" sound). The
thermostat can now be left at this setting. As soon as the room temperature has
dropped below the set temperature, the unit will switch itself on automatically until the
set temperature has been reached again. In this way the room temperature remains
constant with the most economical use of electricity.
5. If you want to change the room temperature setting, rotate the thermostat control dial
clockwise to raise the temperature, or counter-clockwise to lower it.
6. To completely shut the heater off, turn all the controls to OFF, and remove plug from the
socket outlet.
CAUTION: DO NOT OPEN OR REFILL/CHANGE OIL FINS. OIL FINS ARE
PERMANENTLY SEALED AND DO NOT REQUIRE REFILLING OR OIL CHANGING.
ATTEMPTING TO OPEN FINS WILL DAMAGE THE UNIT.
OVERHEAT PROTECTION
This heater includes an overheat protection system that shuts the unit off when parts of the
heater overheat. If this occurs, turn the heater off, unplug it, and inspect and remove any
objects on or adjacent to the heater that may cause high temperatures. Wait 10 to 20
minutes for the unit to cool down then plug it back in and resume the normal operation.
TIP-OVER SWITCH
Your heater is equipped with a tip-over switch, which is designed to automatically shut off
unit when tipped forward or backwards. When returned to normal upright position, the
heater will automatically come on again. This is a safety to avoid possibility of fire should
the unit be accidentally tipped over.
POWER INDICATOR LIGHT
This heater is equipped with a power indicator light. The power light will illuminate when the
heater is plugged and has electric power.
1. Before any cleaning, make sure that:
a. The heater is turned OFF
b. Disconnect power supply at source by removing plug from power outlet.
2. Regular cleaning:
a. Interior dust can often be removed by using a vacuum cleaner with a crevice
tool attachment.
b. Do not use cleaning spray-on liquids or other chemicals on the unit
c. To clean enclosure, use a clean, soft and lightly damp cloth to gently wipe off
the dirt from the surface of the unit. Be sure not to wet the heating element
and the switches. Allow the unit to dry completely before using it.
PROTECTION SYSTEMS
CLEANING AND MAINTENANCE
5
Publicité
