Manual Tune; Prune Invalid Stations; Fm Radio Mode; Save And Recall Favourites - Albrecht Audio Dr 882 Instructions

6.3. Manual tune

To manually tune a DAB station, open the menu by long pressing the INFO / MENU button
and select the "Manual Tune" option. You can now select the desired DAB ensemble and
frequency. This function is recommended only for advanced users.

6.4. Prune invalid stations

To prune not available DAB station from the station list, open the menu by long pressing the
INFO / MENU button and select the "Prune Invalid" option. All stations, which can no longer
be received, will be deleted from the station list. If you want to re-add them later, run a full
scan (see "6.2. Full scan" on page 23) once they are available again.

7. FM radio mode

Select the FM radio mode to listen to analogue radio stations.
Tune a station manually by turning the navigation knob or using the or buttons on
the remote. You can automatically search for the next available station by pressing ENTER
or OK. To automatically search for all available stations and save them as favourites, long
press MODE / SCAN on the device.
Text transmitted by the current station is shown in the display, if available. Use the INFO
button to cycle through different information, including current program information, genre,
frequency, and current date.

7.1. Save and recall favourites

You can save up to 40 stations as favourites for quick access. To save a station, long press
button on the device or remote. Now select the desired preset number with the
the
navigation knob or the ▲ / ▼ buttons, and confirm your selection with ENTER / OK. You
can quickly save a station to the first four preset slots, by long pressing the corresponding
number key on the device or remote.
button on the device or remote. Now select
To recall a saved favourite, short press the
the desired station with the navigation knob or the ▲ / ▼ buttons, and confirm your
selection with ENTER / OK. You can quickly recall a station from the first four preset slots,
by short pressing the corresponding number key on the device or remote.

7.2. Scan settings

To change the scan settings, open the menu by long pressing the INFO / MENU button and
select the "Scan Setting" option. You can now choose between "All Stations" and "Strong
Stations". "Strong Stations" disregards radio stations with weak signal while scanning, as
they have noticeable interference and therefore inferior audio quality. Choose "All Stations",
to hear all receivable stations while scanning.
24