Marechal Electric DSP400 Mode D'emploi page 36

The optional ►SWITCHGEAR CONTROL MODULE is not
compatible with self-ejecting devices
Pre-breaking must be ensured by means of a small additional
2P device (DSN1 type). This device must imperatively be
ejected first: in the event of accidental traction, the ejection
of this small device triggers the opening of the switchgear,
before the ejection of the main device.
IS 40 [DSP] Rev D.5 - 2025-01
DSP1250
The tension cords have a loop at one
end and a cable tie, for clamping the
supply cables (or a a fixed point). A
crimping lug allows looping the other
end, once passed through to the
releasing devices and cut to the desired
lengths.
36/134
,