Uline H-2191 Mode D'emploi

WIDE SPAN/LAMINATE
STORAGE RACKS
TOOL NEEDED
Rubber Mallet
Upright Post x 4 (A)
Side Support x 6 (B)
NOTE: 72" wide racks utilize two shelf supports per level
(total of six per shelving unit).
NOTE: 96" wide racks utilize three shelf supports per
level (total of nine per shelving unit).
NOTE: Lean posts against a wall or assemble
with another person.
1. Connect two upright posts (A) by inserting a side
support piece (B) at the bottom and top of the posts.
(See Figure 1)
NOTE: Side supports should be positioned with
ledge on top.
2. Repeat step one for the other two upright posts (A).
PAGE 1 OF 6
1-800-295-5510
uline.com
Two Person Assembly
Recommended
Front/Back Support x 6 (C)
Shelf Support x 3 (D)
PARTS
Shelving Material Options
Laminate Board x 3 (E)
Particle Board x 3 (E)
Wire Decking x 3 (E)
ASSEMBLY
B
B
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
NOTE: 96 x 36" and 96 x 48"
(W x D) shelves utilize two
laminate boards per level
(total of six per shelving unit).
NOTE: 96 x 36" and 96 x 48"
(W x D) shelves utilize two
particle boards per level
(total of six per shelving unit).
NOTE: 96" wide shelves utilize
two wire decks per level (total
of six per shelving unit).
A
Figure 1
0325 IH-1060