Télécharger Imprimer la page

DeLonghi HVE130 Mode D'emploi page 2

Publicité

1
FUNCTION SELECTOR
SELECTEUR DE FONCTIONS
FUNKTIONSWHLSCHALTER
SELETTORE DI FUNZIONI
FUNCTIE KEUZEKNOP
SELECTOR DE FUNCIONES
SELECTOR DE FUNÇÕES
DIAKOPTHS LEITOURGIWN
FUNKTIONSVÆLGER
FUNKTIONSVÄLJARE
FUNKSJONSVELGER
TOIMINTOJEN VALITSIN
ëÖãÖäíéê îìçäñàâ
prze∏àcznik funkcji
FUNKCIÓÁLLÍTÓ
VT{FYBP)V PF BP<JH YF
AEYRWBBNT
P¤EPÍNAâ FUNKCÍ
selector de funcţiuni
ELECTRICAL CONNECTION (U.K. ONLY)
A) If your appliance comes fitted with a plug, it will incorpo-
rate a 13 Amp fuse. If it does not fit your socket, the plug
should be cut off from the mains lead, and an appropria-
te plug fitted, as below.
WARNING: Very carefully dispose of the cut off plug
after removing the fuse: do not insert in a 13 Amp socket
elsewhere in the house as this could cause a shock
hazard.
With alternative plugs not incorporating a fuse, the circuit
WARNING: THIS APPLIANCE MUST BE EARTHED
IMPORTANT
The wires in the mains lead are coloured in accordance
with the followin code:
Blue:
Brown:
1
Neutral
Live
2
AMBIENT THERMOSTAT
THERMOSTAT D'AMBIANCE
RAUMTHERMOSTAT
TERMOSTATO AMBIENTE
OMGEVING THERMOSTAAT
TERMOSTATO AMBIENTE
TERMOSTATO AMBIENTE
QERMOSTATHS
OMGIVELSESTERMOSTAT
RUMSTERMOSTAT
ROMTERMOSTAT
YMPÄRISTÖN LÄMPÖTILATERMOSTAATTI
íÖêåéêÖÉìãüíéê èéåÖôÖçàü
temperatury pomieszczenia
SZOBA-HőFOKBEÁLLÍTÓ
CNFTY NTHVJCNFN
PROSTOROV¯ TERMOSTAT
termostat mediu ambiant
2
must be re-fitted when changing the fuse using a 13 Amp
Asta approved fuse to BS 1362. In the event of losing the
fuse cover, the plug must NOT be used until a replace-
ment fuse cover can be obtained from your nearest elec-
trical dealer. The colour of the correct replacement fuse
cover is that as marked on the base of the plug.
B) If your appliance is not fitted with a plug, please follow
the instructions provided below:
As the colours of the wires in the mains lead of this appliance
may not correspond with the coloured markings identifying the
terminals in your plug, proceed as follows:
The wire which is coloured blue must be connected to the termi-
nal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the ter-
minal which si marked with the letter L or coloured red.

Publicité

loading