bort medical Generation Mode D'emploi page 9

– in case of persistent complaints, consult the physician or specialist
retailer
– use the medical device in accordance with therapeutic needs
– only use other products simultaneously after consultation with your
physician
– do not make any changes to the product
– do not wear it on open wounds
– do not use in case of intolerance of one of the materials used
– no re-use. This medical aid is intended for treating one patient only
– whilst wearing the brace, please neither use any creams nor
ointments on or around it as they can destroy the material
Fitting instructions
1
Before putting it on, set the thumb wrap and the wrist strap to
the largest possible circumferences and pull the BORT Generation
thumb splint over the thumb and the metacarpus.
2
Firstly, set the thumb wrap and next the wrist cord strap which can
be set to the individual width using the Velcro surfaces.
3
Close the support completely.
Removal
To remove the support, please open the Velcro fasteners and slip the
thumb brace off.
EN
09