Publicité
Liens rapides
AluRoad gen2
Pro
BGP021/026
IEC
30
EN60598
Photobiological Risk
Luminaire Surge protection
Luminaire Surge protection with SPD *optional
LUMINAIRE
LEDs
LED20 - LED34
BGP021
LED35 ÷ LED80
LED70 ÷ LED100
BGP026
LED100 ÷ LED147
LED100 ÷ LED155
LED20 - LED34
BGP021
LED35 ÷ LED70
LED70 ÷ LED100
BGP026
LED120 ÷ LED147
LED100 ÷ LED180
MODULE
LDG20C SM 5050 86L16 2S 730 H22
LDG20C SM 5050 86L16 2S 740 H22
LDG20C SM 5050 86L20 2S 730 H22
LDG20C SM 5050 86L20 2S 740 H22
LDG20C RM 5050 86L32 2S 730 H22
LDG20C RM 5050 86L32 2S 740 H22
LDG20C RM 5050 86L40 2S 730 H22
LDG20C RM 5050 86L40 2S 740 H22
442710499661
2024-12-20
© Signify Holding
All rights reserved
BGP021/026
24
220V
50Hz
240V
60Hz
RGO ( valid for Neutral and Warm White )
DM/CM 6/8 kV ( C-I/ C-II )
DM/CM 6/8 kV ( C-I ) -10/8 kV ( C-II ) ( optional ground for installer )
LED count
DRIVER
22W FP 0,7A
16
22W LP/BP 0,7A
40W FP 0,7A
20
40W LP/BP 0,7A
75W FP 0,7A
32
75W LP/BP 0,7A
40
75W LP/BP 0,7A
40
110W FP 1,0A
16
22W SR 0,7A
20
40W SR 0,7A
32
75W SR 1,0A
40
75W SR 1,0A
40
110W SR 1,0A
SR - System Ready driver; FP - Full Prog driver; LP - LITE Prog driver; BP - Basic Prog driver
ENERGY CLASS
C
B
C
C
C
C
C
C
4
T
20
H 4
H5
09
66
IK
IP
MCB 16A
Inrush current
12A/270µs
48
11,5A/220µs
30
18A/280µs
32
18,7A/210µs
43A/260µs
26
46A/250µs
26
46A/250µs
10
47A/250µs
48
12A/270µs
30
21A/300µs
26
12A/100µs
26
12A/100µs
10
12A/100µs
MODULE
LDG20C SM 5050O1 86L16 2S 730 H23
LDG20C SM 5050O1 86L16 2S 740 H23
LDG20C SM 5050O1 86L20 2S 730 H23
LDG20C SM 5050O1 86L20 2S 740 H23
LDG20C RM 5050O1 86L32 2S 730 H23
LDG20C RM 5050O1 86L32 2S 740 H23
LDG20C RM 5050O1 86L40 2S 730 H23
LDG20C RM 5050O1 86L40 2S 740 H23
1/20
BGP021/026 + CABLES
H 4
H 5
Operating
outdoor
+50°C
3-18m
-40
°C
P(W)
P(W)
(-/+10%)
9 ÷ 17
11,6 ÷ 20
16 ÷ 40
19 ÷ 44
16 ÷ 40
18,8 ÷ 44,5
33 ÷ 53
36,5 ÷ 57
33 ÷ 52
37,5 ÷ 56
47 ÷ 74
53 ÷ 80
47 ÷ 80
52 ÷ 85
9 ÷ 17
11 ÷ 19,6
16 ÷ 40
18 ÷ 44
33 ÷ 53
37 ÷ 58
63 ÷ 74
69 ÷ 79
47 ÷ 95
52 ÷ 102
ENERGY CLASS
B
B
C
C
C
B
C
C
Printed in Poland
Data subject to change without notice
Keep for future reference: www.philips.com/lighting
+/-5%
3.5
3.5
3.5
3.5
4.6
4.6
4.6
4.6
3.5
3.5
4.6
4.6
4.6
Publicité
Manuels Connexes pour Philips AluRoad gen2 Pro
Sommaire des Matières pour Philips AluRoad gen2 Pro
- Page 1 LDG20C RM 5050O1 86L40 2S 730 H23 LDG20C RM 5050 86L40 2S 740 H22 LDG20C RM 5050O1 86L40 2S 740 H23 442710499661 2024-12-20 Printed in Poland Data subject to change without notice © Signify Holding 1/20 Keep for future reference: www.philips.com/lighting All rights reserved...
- Page 2 BGP021 BGP026 FROM THE FRONT 0,020 0,0127 0,020 0,0125 FROM THE SIDE 0,030 0,0212 0,032 0,0275 Dimensions in [mm] Luminaire Mini BGP021 Medium BGP026 Dimensions in [mm] Interact OLC COM SR Luminaire Mini BGP021 Zhaga SR Socket Medium BGP026 Dimensions in [mm] Interact OLC COM SR Luminaire Mini BGP021...
- Page 3 IP66 IP66 Interact OLC Zhaga SR check power green LED WIDE Version without cable DK - Frakobl, før service IT - Togliere tensione prima di fare manutencione GB - Disconnect before servicing NO - Koble fra før service SP - Desconectar antes de manipular FR - Mettre hors tension avant intervention FI - Irrota pistoke ennen huoltoa SE - Bryt strömmen före lampbyte...
- Page 4 Class I Class II Class II Attention: Attention: In class II wires must be double isolated In class II wires must be double isolated In class II wires must be tied up (e.g cable tie) In class II wires must be tied up (e.g cable tie) 6<...
- Page 5 angle SE: angle PT: angle SE: angle PT: max. +50° 60-76 max. +20° max.+10° max.+50° min. -35 ° min. 0 ° min. 0 ° min. -35 ° step 5 ° step 5 ° step 5 ° step 5 ° 60-76 SIDE ENTRY SIDE ENTRY +10°...
- Page 6 180° 180° DDFx - DynaDimmer Ls-x - LumiStep DDF27 DDF3 DDF2 DDF1 LS-6 LS-8 6/20...
- Page 7 7/20...
- Page 8 8/20...
- Page 9 9/20...
- Page 10 10/20...
- Page 11 11/20...
- Page 12 12/20...
- Page 13 13/20...
- Page 14 14/20...
- Page 15 15/20...
- Page 16 (EN) 10kV extra surge protection (SRG10) is ensuring Differential mode protection. In class II : in order to also cover Common mode, PE (Protective Earth) connection to the SPD is to be added at installation. Surges due to discharge from electrostatic fields (ESD) are not covered when installed onto insulated material poles (to protect an equipotential connection is required between the metal housing of the luminaire and the earth;...
- Page 17 (PT) Proteção contra sobretensão até 10 kV (SRG10) com umSDP (dispositivo de proteção contra sobretensão) adicional. Na classe II: Por motivos construtivos, as luminárias estão limitadas ao modo diferencial (entre Fase e Neutro). Proteção de modo comum (entre Terra e Fase+Neutro) através de uma ligação PE (proteção Terra) ao SPD na instalação. Como proteção contra tensões de descarga eletrostática (relacionada com as condições atmosféricas) quando instalado num polo com isolamento elétrico (como fibra de vidro), é...
- Page 18 Instrukcja bezpieczeństwa i użytkowania oprawy Przed przystąpieniem do instalacji oprawy zapoznaj się z instrukcją montażu dołączoną do oprawy oraz niniejszą instrukcją. • Zawsze zwracaj uwagę na dane techniczne oraz znaki umieszczone na cechowaniu oprawy. Objaśnienie znaków znajdziesz w katalogach opraw oświetleniowych producenta. •...
- Page 20 The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V..