INOVU ARM 2 Guide D'utilisation page 8

PREFACE
Every effort has been made to ensure that the information in this document is accurate. However, the manufacturer and
the distributor of this product assume no responsibility for any error, omission in this document, or use of the information
contained herein.
Please preserve this manual for the life of the equipment.
Congratulations on your purchase !
CAUTION
This product contains small items that could be au choking hazard if swallowed. Keep these items away from young
Children.
• Make sure thes instructions are read and completely understood before attempting insatallation. If you are unsure of
any part of this installation, please contact au professional installer for assistance.
• The desk or mounting surface must be capable of supporting the combined weight of the mount and the display,
otherwise the stucture must be reinforced.
• Safety gear and proper tools must be used. A minimum of twp people are required for this installation. Failure to use
safety gear can result in property damage, serious injury or death.
• Please check joint parts every two months, making sure screws are loosened or not.
This product was designed to be installed on desk. Before installing, make sure the mount will support the combined load
of the equipment and hardware. Never exceed the maximum load capacity 9 Kg, or else il may result in product failure or
personal injury.
Note : this product is intended for indoor use only. Use of this product outdoors could lead to product failure or personal
injury.
WARNING
This product contains high pressure gas spring parts, please do not put into fire, high temperature, or disassemble it,
which will lead to unexpectable personal injury.
To ensure the sealing performance of the gas spring, it is suggested to have complete adjustment to the upper arm (with
spring) one time or several times every month.
1. Product Description
2. Package contents
3. Step 1 : Preparations before installing
monitor
4. Step 2 : Option 1 : Clamp
5. Option 2 : Grommet
6. Step 3 : Install the monitor on the plate
7. Step 4 : Manage cables
ARM 2
CONTENT
EN
U S E R ' S G U I D E