Sharp MultiSync PN-ME982 Instructions De Montage page 3

PN-ME552/PN-ME502/PN-ME432
Height adjustment (PN-ME552)
1. The lines on the stand pole are indicators of the height adjustment (Figure 1). Please adjust the pipe to the lines.
2. Please install the stand pole and the pipe with included screws. Please screw the two screw holes at the pipe
(Figure 2).
Pipe
PN-ME552 High/Low
PN-ME502, PN-ME432
Adjust the pipe to a line
Figure 1
Pipe
Figure 2
200 mm (PN-ME432)
400 mm (PN-ME552/PN-ME502)
Stand pole