Télécharger Imprimer la page

Be Cool BC20LEF2301 Mode D'emploi page 164

Publicité

To improve the water drainage process, place the appliance in an
elevated position.
Use a short hose. If the hose is too long, there is a possibility that the
water will not drain completely. Standing water in the hose can lead to
mould.
When the drain is not in use, remove the drain hose from the outlet and
close it again. The water will then run back into the internal water tank.
Maintenance
For maintenance of the unit, switch off the unit and disconnect it from the
Power Outlet.
When the dehumidifier is not in use, it should be disconnected from the
mains supply.
Use water and mild detergents for cleaning. Do not use bleach or
abrasives to clean the appliance.
Only use a damp cloth for cleaning. The dehumidifier must not be
exposed to water jets or splashing water, as this can lead to poorer
insulation or damage to the electronics.
To clean the air inlet and outlet openings, use a soft brush or paintbrush.
Clean the water tank regularly to
avoid mould in the humidifier.
Clean the plastic surface of the unit
carefully with a damp cloth and use
only very mild cleaning agents and no
abrasives or bleach to avoid
scratches or damage.
163

Publicité

loading