Publicité
Les langues disponibles
Les langues disponibles
B. FABRIC TENSIONING FUNCTION
This function is used to adjust the fabric tension of the driven product on 3 threshold levels
(strong-medium-weak).
By default, fabric tension level is set on medium.
To adjust the fabric tension:
-
Place the driven product at its half-way position.
1)
Press the "my" and "Down" buttons simultaneously,
2)
then immediately press and hold the "my" and "Down"
buttons simultaneously again until the driven product
PRYHV XS DQG GRZQ EULHÀ\
The drive is now in set mode for ten seconds only.
Adjust the fabric tension using the "Up" or "Down"
3)
buttons:
To increase the tension on the fabric, press the "Up"
-
button until the driven product moves up and down slowly: the fabric tension of the driven
product passes to the upper threshold.
To decrease the tension on the fabric, press the "Down" button until the driven product
-
moves up and down slowly: the fabric tension passes to the lower threshold.
To validate the setting, press the "my" button until the driven product moves up and down
4)
EULHÀ\
2. 3. 6. 3URJUDPPLQJ RI WKH ¿UVW 6RPI\ LRKRPHFRQWUROŠ ORFDO FRQWURO SRLQW
3URJUDPPLQJ ¿QDO RI WKH ¿UVW FRQWURO SRLQW LV SRVVLEOH RQO\ LI WKH HQG OLPLWV RI WKH GULYHQ
product are set.
A. PROGRAMMING OF THE PREPROGRAMMED SOMFY IO-HOMECONTROL® LOCAL CONTROL POINT
Press the PROG button of the preprogrammed control
-
point: the driven product performs a brief up and down
PRYHPHQW WKH FRQWURO SRLQW LV SURJUDPPHG GH¿QLWLYHO\
B. PROGRAMMING OF A NON-PREPROGRAMMED CONTROL POINT
Switch off the power supply (the pre-programmed
1)
control point is deleted).
Switch the mains power supply back on.
2)
Simultaneously press the "Up" and "Down" buttons of
3)
the control point to be programmed until the driven
SURGXFW PRYHV XS DQG GRZQ EULHÀ\
Press the PROG button of this control point: the driven
4)
product performs a brief up and down movement; the
control point is programmed.
Copyright © 2015 Somfy SAS. All rights reserved.
1)
3)
PROG.
1)
OFF
3)
Non contractual images
EN
2)
4)
2)
ON
4)
PROG.
21
Publicité
