Humanscale NeatCharge Instructions D'assemblage page 5

STEP 6:
Align the charger with the pencil marks. The
small indicator LED should face the front and
the power socket should face the rear. Ensure
that the "THIS SIDE UP" faces upwards.
Attach the charger to the work surface with
the included screws.
NOTE: If mounting to a surface that cannot be screwed
into, such as glass, use the included double-sided
adhesive sticker to mount the charger. Clean and dry
both surfaces and remove the "THIS SIDE UP" sticker
before adhering. Do not use the screws in addition to
the adhesive.
Using the adhesive mount reduces the maximum
charging distance to 28mm (1.1").
5