EVE dimmer switch Prise En Main page 3

Get Started
EN
Eve Dimmer Switch requires a neutral wire and
replaces a single-pole or 3-way switch. Only
for use with copper or copper clad wire in dry,
indoor locations. Not suitable for controlling
ceiling fans.
If you are unsure or uncomfortable about ins-
talling Eve Dimmer Switch, consult a qualified
electrician. To be installed and/or used in
accordance with appropriate electrical codes
and regulations.
120 VAC; Min. 3 W; Max. 150 W/ 1.25 A (LED);
Max. 600 W/ 5 A (incandescent/tungsten);
300 VA (MLV); Max. 600 W/ 5 A (Halogen)
1
Turn off power at the circuit
breaker that controls the
light switch. Ensure power
is off by switching your
existing light switch on and
off multiple times.