Operating Instructions; Selecting Luminance Unit Cd/M Or Fl; Luminance Measurement - Rs Pro Rs-137 Manuel D'instructions

5. OPERATING INSTRUCTIONS

The meter performs zero adjustment automatically when the power
comes on. This adjustment need to attach the photo detector cap.
5-1 Selecting Luminance Unit cd/m
1. Press the
2. Press SET key, the annunciator "SET 01" is displayed.
3. Press △ key to select "cd/m
4. Press ↵ key to store the desired measure unit.

5-2 Luminance Measurement

1. Press the
2. Remove the photo detector cap and face it align to the point to be measured
field.
3. Read the luminance value from the LCD display.
4. Press H key, if the displayed value need to be hold. Press H key again to
exit the data hold mode.
5. Press ↵ key to view CAF and CCF values for use in measurement.
6. Press
09/15/17 Version No. 00
Zero Adjustment
key to turn on the meter.
key to turn on the meter.
key to display the time or date.
2
or fL
2
" unit or press ▽ key to select "fL" unit.
cd/m2
fL
SET
cd/m2
Luminance Meter / EN
9