Operation - IF Lighting Equinox 1000 Manuel D'utilisation

Figure 2 – All mounting points should be connected to the hanging hooks
Connecting Power:
Use the supplied cord and connect the cord to an electrical outlet of appropriate type and rating.
Ensure that the cord:

Is not concealed or extends through a wall, door, ceiling or other parts of the building
structure.

Is not located above a suspended ceiling or dropped ceiling.

Is not permanently affixed to the building structure.

Is routed so that it is not subject to strain and is protected from physical damage.

Is visible over its entire length.
Turning On/Off and Dimming:
The luminaire has a dimming knob and an on/off switch. Turn the power switch to the on
position and set the desired output using the dimming knob.
Adjusting the Mounting Height from Plant Canopy:
Hangers include a sufficient length of rope to meet a variety of desired mounting heights. It is
recommended to mount the luminaire 18-24" above the canopy for optimal performance. Hold
down the release button on the hanger, adjust the rope to the desired mounting height and
release the adjustment button.

OPERATION

English - 3