Assembly And Hanging - IF Lighting Equinox 1000 Manuel D'utilisation

Preface:
The luminaire should be installed by qualified personal and adhere to all local rules, regulations
and codes.
Warnings:
The luminaire is not user serviceable and contains no replaceable parts. The enclosure is not
designed to be accessible and must not be removed. The luminaire must be returned to the
manufacturer for any repairs.
Environmental:
The luminaire is to be installed in damp or dry environments only. Do not install in areas where
direct water can come in contact with the luminaire. The maximum ambient temperature of the
installed environment must not exceed 40°C. The installed environment should be mechanically
ventilated or cooled by other means.
Mounting:
Use the supplied hanging hardware to hang the luminaire from a suitable support as follows:
1. Attach one end of the hook to the luminaire mounting point.
2. Wrap the cord around the support once then attach the free end to the opposite
luminaire mounting point.
3. Repeat for the other side of the luminaire. See illustrations below.
4. Adjust the length of the hanging cord to set the desired luminaire height and angle.
Figure 1 – Luminaire hanger is fully wrapped around the support
ASSEMBLY & HANGING
English - 2