Hkoenig TOS32 Manuel D'utilisation page 9

3. When toasting has finished, the loading handle will rise and the toasted bread
can be removed. You can lift the loading handle upwards beyond its rest
position to help you remove the toast.
4. If the toast is not done enough it can be toasted again. Turn the browning
control to a lower setting and watch the toast to ensure that it doesn't burn.
5. Toasting can be stopped at any time by pressing the cancel button. If you are
toasting a single slice of bread, set the browning control to a lower setting than
normal. By using a lower setting when toasting a single slice of bread, it will
not be over toasted.
IF YOUR TOASTER JAMS
Never use a knife or any other utensil or implement to remove jammed bread. Never
insert your fingers into the bread slots.
1. Unplug the toaster from the mains supply socket.
2. Allow the toaster to completely cool down.
3. Carefully ease the bread out of the toaster being careful not to damage the
heating element.
CLEANING
Unplug the unit before cleaning or performing
repairs or maintenance.
Clean the outside of your toaster with a damp cloth
dry thoroughly. Never use harsh, abrasive
then
or caustic cleaners.
CRUMB REMOVAL
It is important that crumbs are not allowed to build up inside your toaster. Excess
crumbs are unhygienic and could catch fire. Crumbs can be removed by sliding the
crumb tray out from the bottom of your toaster. You can then tip the crumbs out.
Always make sure that your toaster has completely cooled down and is disconnected
from the mains supply before removing crumbs. Never use your toaster without the
crumb tray fitted—always replace the crumb tray before using your toaster.