Publicité
Safety Notes
•
This locomotive is to be used only with an operating system designed for
it (DC power = 18V±, Märklin AC, Märklin Digital, Märklin Systems, DCC).
•
Use only switched mode power supply units and transformers that are
designed for your local power system.
•
This locomotive must never be supplied with power from more than one
transformer.
•
Pay close attention to the safety notes in the
instructions for your operating system.
•
The feeder track must be equipped to prevent interference with radio
and television reception, when the locomotive is to be run in conventio-
nal operation. The 104 770 interference suppression set is to be used for
this purpose.
•
The wire used for feeder connections to the track may only be a maxi-
mum of 2 meters / 39 inches long.
•
WARNING! Sharp edges and points required for operation.
General Notes
•
The operating instructions are a component part of the product and
must therefore be kept as well as transferred along with the product to
others.
•
Please see your authorized Märklin dealer for repairs or spare parts.
•
http://www.maerklin.com/en/imprint.html
No warranty or damage claims shall be accepted in those cases where parts neither
manufactured nor approved by Märklin have been installed in Märklin products or
where Märklin products have been converted in such a way that the non-Märklin
parts or the conversion were causal to the defects and / or damage arising. The
burden of presenting evidence and the burden of proof thereof, that the installation of
non-Märklin parts or the conversion in or of Märklin products was not causal to the
defects and / or damage arising, is borne by the person and / or company responsible
for the installation and / or conversion, or by the customer.
Functions
•
The mode of operation (mfx, Märklin Motorola, or DCC) is recognized
automatically.
•
Possible addresses: Märklin 01 – 80, DCC 01 - 9999
•
Address set at the factory: (Märklin) 03 / (DCC) 03
•
Mfx technology for the Mobile Station / Central Station.
Name set at factory: E 03 002
•
Adjustable acceleration (ABV).
•
Adjustable Braking delay (ABV)
•
Adjustable maximum speed.
•
Volume can be changed for the sound effects.
•
Setting locomotive parameters (address, acceleration/braking delay,
maximum speed, etc.): with the Control Unit and DCC (CV programming),
Mobile Station, or the Central Station.
•
Built-in sound effects circuit, can only be used in operation
Märklin Digital, Märklin Systems, or DCC.
•
The model is designed for operation on Märklin 1 Gauge track. As the
consumer you assume the risk for operating on other makes of track.
•
Minimum radius for operation: 1020 mm / 40-1/6".
•
Only the train control functions and headlight changeover feature are
available in analog operation.
•
Note for operation with the Mobile Station:
When there is a continued very high power consumption, the Mobile
Station shuts off completely like a short circuit. In this situation, reduce
the number of functions and then turn the system on by pressing the
STOP button again.
11
Publicité
