ION Audio Party Starter Guide D'utilisation Rapide page 3

Features
1. Volume / Power – Turn this dial to the
right to power on Party Starter and
also adjust the level of the speaker
volume.
2. Bluetooth Pairing Light – The Paired
LED will be lit when a device is paired
to Party Starter.
3. Bluetooth Reset Button – Press this button to disconnect a paired Bluetooth device and pair with
another Bluetooth device.
4. Party Light Switch – Adjust this switch to turn the lights on/off.
5. Power / Battery Light – Indicates whether Party Starter is powered on and shows the state of the
battery. If the party lights or LEDs appear dim, or if your music cuts out or fails to play, your battery
may require recharging. See
states.
6. Micro-USB Charging Port – Connect the included micro-USB cable to connect Party Starter to a
USB power adapter connected to a power outlet or to your computer.
7. Auxiliary Input – This stereo 1/8" input can be used to connect a smartphone, MP3 player, or other
audio sources.
Party Starter LED Activity
Power LED:
Green LED = Party Starter is powered on
Orange LED = Battery is charging with the power on
Red LED = Battery is charging with the power off
Bluetooth LED:
Solid Blue LED = Paired to a Bluetooth device
No LED = Party Starter is unpaired/in pairing mode (but powered on)
Connecting with a Bluetooth Device
1. Turn on your Bluetooth device.
2. Power on Party Starter and it will automatically go into pairing mode to search for Bluetooth devices.
3. If your Bluetooth device is not able to pair to Party Starter, press the 'reset' button on Party Starter to
break the previous Bluetooth connection and reset the Bluetooth module.
4. Navigate to your Bluetooth device's setup screen, find "ION Speaker" and connect.
Note: If your Bluetooth device prompts for a pairing code, enter '0000'.
5. The Paired LED will light up solid when it is 'paired'.
Note: If you experience trouble pairing or playing music, update your device's OS.
6. To disconnect a paired Bluetooth device, press the 'reset' button on Party Starter.
7. To connect to another Bluetooth device, repeat steps 3-4.
Troubleshooting
If the sound is distorted: Try lowering the volume control of your sound source. Also, try to reduce the
overall volume of Party Starter.
If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower the bass
level. This will allow you to play the music louder before clipping (distortion) occurs.
7 4 5 6
the Party Starter LED activity box for more information on the LED
3
2
1 3