Publicité
Command
set_IP_address
get_IP_address
SETNETWORKTYPE
GETNETWORKTYPE
SETSUBNETMASK
GETSUBNETMASK
SETDEFAULTGATEWAY
GETDEFAULTGATEWAY
GETDNS1
GETDNS2
INTERNETSPEED
Command
COLOURTEMP
GETPICTUREMODE
PICTUREMODE
GETCONTRAST
SETCONTRAST
GETBRIGHTNESS
NETWORK COMMANDS
Description
Set static IP address of
eth0 network interface.
Get IP address of eth0
network interface. Usage:
get_IP_address
set network type (eg.
SETNETWORKTYPE
value) (value should
be 'wired', 'wireless' or
'disabled' as string)
get network type (eg.
GETNETWORKTYPE)
set subnet mask (subnet
mask value should be of
format nnn.nnn.nnn.nnn)
(eg. SETSUBNETMASK
nnn.nnn.nnn.nnn)
get subnet mask (eg.
GETSUBNETMASK)
set default gateway
(default gateway value
should be of format
nnn.nnn.nnn.nnn) (eg.
SETDEFAULTGATEWAY
nnn.nnn.nnn.nnn)
get default gateway (eg.
GETDEFAULTGATEWAY)
get DNS server 1 (eg.
GETDNS1)
get DNS server 2 (eg.
GETDNS2)
start internet speed test
PICTURE COMMANDS
Description
Set colour temperature.
Get picture mode.
Select picture mode.
Get picture contrast
value.
Set picture contrast
value.
Get picture brightness
value.
English - 18 -
Parameter
str-int n Example: set_IP_
address 192.168.0.15
no parameter
string n ('wired', 'wireless' or
'disabled')
no parameter
string "nnn.nnn.nnn.nnn"
no parameter
string "nnn.nnn.nnn.nnn"
no parameter
no parameter
no parameter
no parameter
Parameter
str-int n (n = normal, warm,
cool)
no parameter
int n (1 = dynamic, 2 =
natural, 3 = cinema, 4 =
game)
no parameter
int n (0 ≤ n ≤ 100)
no parameter
Return
"#*IP address setting Succesfull
#*IP address setting NOK"
#*IPaddr: ...
#*Network type is set to: <network-
type>
#*the network type is <network-
type>
"#*set subnet mask: nnn.nnn.nnn.
nnn
#*setting subnet mask is failed"
#*the subnet mask is nnn.nnn.
nnn.nnn
"#*set default gateway: nnn.nnn.
nnn.nnn
#*setting default gateway is failed"
#*the default gateway is nnn.nnn.
nnn.nnn
#*DNS server 1 is nnn.nnn.nnn.
nnn
#*DNS server 1 is nnn.nnn.nnn.
nnn
" Speed test is started.
Prints ""No internet connection
found"" message if fails."
Return
#*setColourTemp() set to n
#*Picture Mode is ... for current
source
"#*setPictureMode() set to n
#*Incorrect picture mode
paramater entered"
#*THE CONTRAST VALUE : ...
"#*Picture contrast value is set to n
#*Same value is set. Do nothing.
#*Incorrect value must between
defined ranges 0-100"
#*THE BRIGHTNESS VALUE : ...
Publicité
