Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Loading for Peel Mode
1. Peel and discard the first four inches of labels from the
backing paper.
2. Hold the printer upright and gently press down on the
label deflector.
3. Feed the supply over the platen roller, over the peel
bar, and through the opening at the base of the label
deflector.
4. Push the label deflector up until it snaps into place.
5. Close the cover completely.
6. Touch the Home key on the display, then select Load
Supply, Calibrate Stock.
Platen Roller
(black rubber)
Peel Bar (metal)
Backing Paper
Opening
Label
Deflector
EN-5
Publicité
