Bigben BTLSWBEAR Mode D'emploi page 14

Screw the 2 screws into the plugs. Leave about 10mm of screw showing to hang the speaker.
Hang your speaker on the wall. Ensure it is safe.
Insert the wall plug
You will need to remove the speaker from the wall occasionally to charge it. Just lift slightly and then
remove from the wall.
Operation
Long press the power button at the bottom of the speaker for 2-3 seconds. The light and Bluetooth
will be on automatically.
Long press the power button at the bottom of the speaker for 2-3 seconds again, the light and
Charging
Connect the speaker with the USB C charging cable and connect to a USB charging source, i.e.
your mobile phone AC adaptor.
The Red LED indicator besides the power button will turn ON when charging, and turn OFF when
fully charged.
Screw the screws into the plugs
- EN 4 -