3B medical Lumin LM3000 Guide D'utilisation page 4

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Because the Lumin® operates using a form of high energy light, it is very effective
in disinfecting your mask, hose, water chamber, and accessories. Disassembly of
your mask is not required for daily routine disinfection. Once a week, however, most
manufacturers recommend that you disassemble your mask to wipe down residue. A
disassembled mask can be placed in the Lumin® for an even more thorough disinfection.
Hoses do benefit from Lumin® disinfection, and the minimum recommendation of
twice weekly will prevent build up of biofilm in the hard to reach areas.
Use of the clear Lumin® RACK is suggested to improve disinfection. Set your mask and
accessories on the RACK to allow greater penetration of the underside of the article
being disinfected. If your item is large, use of the Lumin® RACK is optional and it may
be removed.
1. Plug the Lumin® power cord in a wall outlet.
2. For your humidifier water chamber, open the water chamber and lay both sides
facing up. For your CPAP mask lay the mask with the inside facing up and laying
flat for maximum UV penetration
3. If your mask or accessories are visibly soiled please first wipe thoroughly with a
damp cloth or a CPAP wipe.
4. Close the Lumin® chamber drawer
5. Press round power button, the Cycle-On red light will turn on indicating that the 5
minute disinfection cycle has started.
6. A light glow of UV Light will be visible through the tinted oval window on the top of
the unit while disinfection is occurring
7. After 5 minutes the Lumin® will emit a beep and the UV light will no longer be visible.
A green light will indicate completion of the disinfecting cycle. You may now remove
your equipment. No waiting period is necessary and your mask and equipment are
now ready to use.
The Lumin® bulb is designed to exceed the life of your device so changing the bulb
should not be necessary. If, however, it does become necessary, the bulb is removed
by simply grabbing the base and pulling firmly. The bulb is easily replaced by inserting
the new bulb and pushing it into the socket. If you are in need of a replacement bulb
please contact your local home care dealer.
Helpful Hint:
The Lumin® can disinfect a variety of
other products safely, including dentures,
hearing aids, and toothbrushes!
Using Your Lumin® Rack
Using Your Lumin®
Caring for the Lumin®

Publicité

Table des Matières
loading

Produits Connexes pour 3B medical Lumin LM3000

Table des Matières