Troubleshooting - B.A. International BA OPTIMA U-MIX Mode D'emploi

10
In the unlikely event of a problem occurring with the capsule mixer,
please check against the below listed SOP. If the solution is not
provided below, please contact your local dealer or BA International for
a solution or repair. Thank you.
Scenario
Unable to operate
when pressing
START / STOP
button
The apparatus
moves during
operation.
Abnormal Noise
All B.A. International Products are manufactured under thorough quality
control. If the apparatus were to be broken under normal operation
in accordance with the Instruction Manual and within the warranty
period, the broken unit is subject to repair and maintenance free of
charge. Please contact your nearest local dealer or B.A. International
for your inquiry & best solution. Our warranty period extends to 1
year from the date of purchase.
Trouble Shooting
Possible Cause
The power adaptor
might be loose.
The L shaped plower
plug might be loose.
The protective shield
is open.
Please check if the
apparatus is placed on
uneven surface.
2 Screw bolts have
not been removed.
Product Warranty & Repair
Possible Solution
Ensure the power adaptor
is plugged in to the unit.
Ensure the L shaped plug
is properly plugged in.
Make sure the protective
shield is firmly shut.
Please place a securely
stable plastic pad under
the equipment.
Unscrew the two screw bolts
at the bottom of the units.