Oceanic OCEACTG2VB8 Guide D'utilisation page 47

• Repairs must be performed by an authorized personnel only. Improper repairs can
cause considerable danger to the user.
• However, some minor problems can be resolved as follows:
Breakdown
No ignition
The device turns
on incorrectly
There is noise during
combustion and ignition
The flame goes out
during use
yellow flame
VI. TROUBLE SHOOTING
Possible Cause
No spark
The burner cover is
not properly assembled
The gas supply is turned
off
The gas supply is
not fully open
The burner cover is not
properly assembled
The spark plug is
contaminated with
foreign substances
The burners are wet
The holes in the flame
spreader are blocked
The burner cover is not
properly assembled
The flame detection device
is contaminated with
substances
Foreign
The products being cooked
boiled and put out the flame.
A strong current of air can have
extinguished the flame
The flame spreader
holes are blocked
A different gas is used
Solution
Check the power
supply
Assemble properly
lid
Fully open the gas
supply
fully open
gas supply
Assemble the burner cap
correctly
Substance wipe with a dry
cloth
Carefully dry the
burners
Clean the flame
spreader
Assemble the burner cap
correctly
Clean the flame
monitoring device
Turn off the burner knob. Wait
one minute and turn again
burner.
Please turn off the button and
check the cooking area to
check if there is not an open
window. wait a
minute and light the burner
again.
Clean the flame
spreader
Check the gas used.
46