Publicité
Les langues disponibles
Les langues disponibles
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to
installation instructions.
NOISES
CLICK!
BLUBB!
TECHNICAL DATA
The technical information is situated in the
rating plate on the internal side of the
appliance and on the energy label.
INFORMATION FOR TEST INSTITUTES
Installation and preparation of the
appliance for any EcoDesign verification
shall be compliant with EN 62552.
Ventilation requirements, recess
dimensions and minimum rear clearances
3. If necessary, replace the defective
SSSRRR!
shall be as stated in this User Manual at
Chapter 3. Please contact the
manufacturer for any other further
information, including loading plans.
door gaskets. Contact the Authorised
Service Centre.
BRRR!
17
HISSS!
Publicité
