Bresser TemeoTrend LB Mode D'emploi page 32

5b) HOW TO SET THE CLOCK MANUALLY
To set the clock manually, hold [MODE] for two seconds it will
show the year. Use [▼] or [▲] to change it.
Press [MODE] to confirm. Repeat the same procedure to set the
month, date, date-month format, 12/24, hour, minute, display
language, zone time offset.
During the setting, press and hold [▼] or [▲] will increase or
decrease the value rapidly.
For display language, you can choose among English (EN), Ger-
man (DE), French (FR), Italian (IT), Spanish (SP), Dutch(DU) and
Swedish(SW) - in that order.
If there is an item you do not wish to change, simply press
[MODE] to bypass the item.
When you completed the change, press [MODE] to exit.
The display will return to the clock mode.
5c) CALENDAR CLOCK DISPLAY MODES
The time is displayed in hour-minute format. The calendar is
displayed in a day-month format.
Each press on the [MODE] button will change the display bet-
ween clock with seconds, clock with day of week, zone time with
day of week and zone time with seconds.
5d) HOW TO SET THE ZONE TIME
To set the zone time,
1. Press [MODE] until at zone time display mode,
2. Hold [MODE] for two seconds, the zone time offset will be
displayed.
3. Enter the offset using [▼] or [▲].
4. Press [MODE] to exit.
W
The alarm " " " " icons will be displayed indicating which
W
S
alarm is armed. You can also arm or disarm an alarm by pressing
S
˚C
˚C
32