Technical Specifications Of The Product; Use Of The Product - senya SYCP-HB002 Notice D'utilisation

II.3 TECHNICAL SPECIFICATIONS OF THE PRODUCT

Soup maker for hot and cold preparations

4 predefined programms: smooth soup, chunky soup, manual blending, auto cleaning

Start / Cancel button

Jug in stainless steel

Maximum capacity for hot preparations : 1.4 L

Maximum capacity for cold preparations : 1.6 L

Intelligent control system to avoid overflows

Auto memory function

Double blades in stainless steel

Heating power : 800-950W

Motor power : 200W

Power : 220-240V ~ 50-60Hz

Product dimensions : 20.5 x 17.5 x 34 cm
III. USE OF THE PRODUCT
III.1 BEFORE THE FIRST USE

Wipe the unit body with a soft, dry cloth and wash the blades with hot water and
washing up liquid.

Rinse with clean water and dry carefully with a soft cloth.

Place the product on a stable and clean surface
Tips for using the appliance :

The total quantity of ingredients and liquid must not go above the maximum limit (cold
preparation 1.6 L, hot preparation 1.4 L). Any spillages may result in burns.

Ensure all ingredients are peeled, sliced or cubed (2-3cm)

Always stir your ingredients before adding the motor, this prevents ingredients sticking
to the bottom of your soup maker. Always remove the soup when the cycle is finished
because the blender will still be hot and may burn your soup.

If the control panel does not light up or if the blender does not start after it is switched
on, check that the bowl and motor are properly positioned.

Do not heat/blend with the appliance empty.

Some operations cannot be performed properly with this blender: béchamel sauce,
mayonnaise.

The appliance may be stopped during the cooking process by pressing the start /
cancel button.
38