Terk RMTHINTV1A Manuel Du Propriétaire page 14

Setting Up the THINTV1A
(continued)
Coaxial Cable Installation Precautions
• Do not bend coaxial cables into less than a three-
• Do not install a coaxial cable where it will have
• Use only round-headed staples. Any clamps or
• Do not expose a coaxial cable to a temperature
• Make sure you uncoil the antenna's coaxial cable
13
All manuals and user guides at all-guides.com
inch radius. Tighter bends can cause shorts and can
change a cable's impedance.
a pulling tension greater than 15 pounds during
installation. After installation, make sure there is no
tension on the cable.
securing devices used with coax should grip the
cable evenly about the circumference without
crushing the cable. Flat staples can damage the
coaxial cable.
greater than 176 degrees Fahrenheit. Keep the
cable away from heating vents and water heaters.
completely. Leaving it coiled will reduce reception
performance.