Charlie Crane NOGA Mode D'emploi page 5

USER MANUAl
3
hook the top of
the table to the
wall bracket.
Installing the changing mat
If you haven't bought the PUDI mattress from Charlie Crane, then instead use a PVC
changing mat, sized 50x70 cm. Use the Velcro pads to prevent the mattress from
falling when you raise the table.
Glue the Velcro to the table as
1
below:
Instructions for use of the changing table
Opening the table:
lift the locking
tap and lower the
changing table into a
horizontal position.
4
Attach the table
by tightening the
screws on the
lower shelf.
Then do the same to the under-
2
neath of the changing mat (not
necessary if you have the PUDI
mattress).
5
EN