All manuals and user guides at all-guides.com
EN
Congratulations for the purchase of gasoline brush cutter from the successfully growing
brands - RAIDER. As being properly installed and operated, RAIDER are safe and reliable machines,
and work with them will bring a real pleasure. For your convenience has been built an excellent
service network of 45 service stations across the country.
Before using this gasoline brush cutter please carefully acquaint to these "instructions for use".
In interest of your safety and to ensure proper use, read these instructions carefully, including the
recommendations and warnings in them. To avoid unnecessary errors and accidents, it is important
that these instructions must remain available for future reference to all who will use the machine. If
you sell it to a new owner "Instructions for Use" must be submitted along with it, so that new owner
can meet with the relevant safety measures and operating instructions.
EUROMASTER Import Export Ltd. is an authorized representative of the manufacturer and owner
of the trademark RAIDER.
Adress: Sofia City 1231, Bulgaria "Lomsko shausse" Blvd. 246, tel 02 934 33 33, 934 10 10, www.
raider.bg; www.euromasterbg.com; e-mail: info@euromasterbg.com.
Since 2006 the company introduced the system of quality management ISO 9001:2008 with scope
of certification: Trade, import, export and servicing of hobby and professional electrical, mechanical
and pneumatic tools and general hardware. The certificate was issued by Moody International
Certification Ltd, England.
Components (see page 2 for reference picture)
1. Engine.
2. Fuel tank.
3. Cap of the gasoline tank.
4. Clutch cover.
5. Cowl shaft.
6. Cutting attachment guard.
7. Blade.
8. Throttle control.
9. Throttle lockout.
10. Hold button throttle lever (for ease of continuous operation).
11. The cord of gas.
12. Handle of the manual starter.
13. Ignition switch
14. Gas limit switch
15. Air filter case
16. Spark plug connector
Original instructions' manual
Dear Customer,
25