PURE ELECTRIC PURE ESCAPE Manuel D'utilisation page 6

4. Insert & tighten bolts
Locate the stem bolts (within the sealed package),
and insert them loosely into the stem bolt
recesses. Use the Allen key supplied to tighten
the bolts. Don't tighten each screw all the way in
one go.
6. Tyre pressure
Check the tyres are inflated to the optimum
pressure of 36 PSI / 2.5 Bar.
Always use the valve extender with your pump.
You will damage the tyre valves if you do not.
User Manual | EN
5. Fully charge
Charge your e-scooter until the charger status
light changes from red to green.
5