Télécharger Imprimer la page

AVENZO AV-TW5007 Manuel D'utilisation page 15

Publicité

Les langues disponibles

Les langues disponibles

Turn on both earphones manually by pressing the power button for 5 seconds, until both
blink blue and red. Insert them in the power bank and start charging them. When they are
removed from the power bank, they will synchronize with each other again.
Use of Power Bank:
The power bank of the AV-TW5007 has an internal battery to recharge the earphones. To
recharge the earphones, you must insert them correctly into the power bank, matching
the charging pins of the earphones and the power bank.
When the earphones are charging, they will turn off and disconnect from your
smartphone. The red lights on the earphones will flash, indicating that the charge is in
progress. When an earphone is fully charged, its light will turn off.
To charge the power bank, connect the supplied cable to a USB charger or other power
source.
The LED indicator shows the percentage of battery remaining in the power bank. When
the power bank is charging, the numbers will flash and when the charge is complete, the
percentage will reach 100%.
If in the future you need at any time to discard this product, please note that electrical
products should not be thrown away with regular garbage. Please place this product in the
recycling bins or go to designated recycling areas. Check with your local authority or the
retailer which is the best recycling process.
Avenzo Global Tech S.L. certifies that this product complies with the essential requirements and
whichever other applicable or required CE regulation. The complete copy of the Declaration of
Conformity for this product can be obtained through our website www.avenzo.biz.

Publicité

loading

Produits Connexes pour AVENZO AV-TW5007