Safety Regulations; Layout And Items Supplied; Proper Use - EINHELL ST 315 Instructions D'origine

Danger!
When using the equipment, a few safety pre-
cautions must be observed to avoid injuries and
damage. Please read the complete operating
instructions and safety regulations with due care.
Keep this manual in a safe place, so that the in-
formation is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and safety regulations as
well. We cannot accept any liability for damage
or accidents which arise due to a failure to follow
these instructions and the safety instructions.

1. Safety regulations

Danger!
Read all safety regulations and instructions.
Any errors made in following the safety regula-
tions and instructions may result in an electric
shock, fi re and/or serious injury.
Keep all safety regulations and instructions
in a safe place for future use.
•
The slide is suitable for use with the bench-
type circular saws recommended by the
manufacturer.
•
When using this slide you must also follow
the original operating instructions and safety
information issued for the bench-type circular
saw used with it.

2. Layout and items supplied

2.1 Layout (Figs. 1-3)
100. Slide plate with scale
101. Stop rail with profi le
102. Guide rail system
103. Angle (rear)
104. Angle (front)
105. Stop for cross cutting
106. Clamping lever for angle setting
107. Hexagon screw (large)
108. Washer, large
109. Self-locking nut
110. Socket head screw
111. Locking grip
112. Hexagon screw (small)
113. Washer (small)
114. Spring washer (small)
115. Nut (small)
116. Washer (medium)
117. Locking screw
Anl_ST_315_SPK9.indb 13 Anl_ST_315_SPK9.indb 13
GB
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Slide plate with scale
•
Stop rail with profile
•
Guide rail system
•
Angle (rear)
•
Angle (front)
•
Clamping lever for angle setting
•
Hexagon screw (large)
•
Washer (large) (2x)
•
Self-locking nut
•
Socket head screw (2x)
•
Locking grip (2x)
•
Hexagon screw (small) (8x)
•
Washer (small) (12x)
•
Spring washer (small) (8x)
•
Nut (small) (4x)
•
Washer (medium)

3. Proper use

The slide is suitable for use with the bench-type
circular saws recommended by the manufacturer.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
- 13 -
11.03.2020 15:03:39 11.03.2020 15:03:39