KSIX BXLED01 Manuel D'utilisation

ENGLISH - USER MANUAL
LED STRIP – BXLED01
1. Characteristics
1.1 Technical specifications
Power: 7.2W/m
Input: 220-240V / 50 Hz
Luminous flux: 2,400 lm
LED colour: CCT (6,000K – 6,500K)
CRI index: 85
Number of LEDs: 300
Lifespan: 20,000 h
Lighting angle: 120°
Protection rating: IP20 (dustproof)
Operating temperature: -20°C to +50°C
Dimensions: 500 x 1 x 0.3 cm (long x wide x thick)
Weight: 400 g
Materials: ABS + PC
Connectivity: Infrared
1.2 In the box
1 x LED strip
1 x Controller
1 x Power adapter
1 x DC cable
1.3 Product parts
1. 5 metres strip
2. Power adapter
Safety note: Don't modify the product or exchange any
parts. Do not cover the product once it is installed and
connected to the power. Do not install the product on top of
high-heat objects or in a wet place.
1.4 How to connect the strip
Connect the power adapter to the DC cable, and the DC
cable to the strip. Then plug into a power source.
1.5 How to cut the strip
To perform this task, disconnect the strip from the power
supply and with the help of a pair of scissors, make a cut in
the guides marked on the strip.
Note: once the strip has been cut, it cannot be used again.
3. Remote control
4. DC cable