Publicité
Les langues disponibles
Les langues disponibles
Open the fuse holder O and turn anticlockwise.
Remove the faulty fuse and dispose of it according to the regulations.
Insert a new 5 x 20 mm, fast-blow, 500 mA, 250 V fuse (type F500MAL250V) in
the fuse holder O .
Close O the fuse holder and turn clockwise.
NOTE!
5 when opening and closing the fuse holder O due to the rotational move-
ments.
If the fuse blows several times, check the device and rectify the cause of the fault
before switching the marten repellent back on.
5. Maintenance, cleaning, storage and transport
Maintenance and repairs
The marten repellent is maintenance-free. The user cannot carry out any mainte-
nance or repair work apart from replacing the fuse as described above. Please
contact our customer service if you experience any operating faults.
Cleaning
Clean the marten repellent with a damp cloth if necessary. Do not use any ag-
gressive abrasive cleaning agents, solvents or petrol. The marten repellent and its
accessories must not be sprayed with or soaked in water.
Take care not to damage the vehicle battery cable
19
GB
Publicité
