Operating Positions - THOMSON THFP06733R Mode D'emploi

Recommend Speed setting:
Accessories Picture
Meat
Grinder
Kneading
Hook
Beater
Balloon
Blender

Operating positions

Warning!
Do not operate the machine continuously more than 15 minutes.
After one time use, the machine should be cooled down for 30minutes.
Use speed 3 to make pasta.
Do not use more than two functions in same time.
Do not make pasta exceed 500g flour continuously. After making pasta with 500g flour,
the machine need 30 minutes rest to cool down.
Operate the appliance only when the accessory/tool is attached according to this table and
is in the operating position.
Always keep the bowl in the appliance when using it.
Position
1
2
3
4
Risk of injury from the rotating tools!
While the appliance is operating, keep fingers clear of the mixing bowl. Do not change
tools until the appliance is at a standstill and have been unplugged. When switch off, the
drive continues running briefly.
Note: If the machine stalls or jams during use, switch off. Depress the reverse switch for a
few seconds to release the clogged pasta. Unplug and remove any clogged material.
Button Speed
Speed 3 for 76rpm
Pasta
Speed 5 for 152rpm
meat
1-2
113-175rpm
3-4
221-494rpm
5
5
Set up Kneading Hook, Beater,
Balloon Whisk, according to
your need.
GB-4
One and a half minutes at
button 1 automatically
jump to speed 2 .
6mimutes is enough
494rpm
15000rpm
Time
6min
5min
6min
3min