Charging Instructions - AcousticSheep SleepPhones Instructions D'utilisation

Welcome
Thank you for purchasing the SleepPhones
You're going to love them!
I N S T R U C T I O N S

Charging Instructions:

1. Plug one end of the micro-USB cable into the charging port of the wireless
Bluetooth
®
into the USB port on your computer.
2. While charging, there will be a solid red light next to the raised button in the center
of the wireless Bluetooth
3. When fully charged, it will change to a solid green light.
Pairing Instructions:
1. Before pairing, fully charge your SleepPhones
2. Place your Bluetooth
3. Find the button on the wireless Bluetooth
4. Press and hold for 5 seconds. Your SleepPhones
to pair."
5. Your SleepPhones
device and provide a PIN code.
6. Navigate to the Bluetooth
manual for pairing instructions for your device.)
7. Perform the pairing procedure on your Bluetooth
SleepPhones
8. [SleepPhones] will appear. Select [SleepPhones] to add it to the list of synced
devices and input the PIN code, if required.
9. Your SleepPhones
w w w . S l e e p P h o n e s . c o m
receiver located inside the headband. Plug the other end of the cable
receiver.
®
device within 3 feet (1 meter) of your SleepPhones
®
will prompt you to connect to your Bluetooth
®
connections menu on your device. (Consult the user's
®
.
®
will announce, "Pairing complete."
®
Wireless headphones.
®
Wireless headphones.
®
receiver located inside the headband.
®
® will announce, "Power on, ready
device to automatically detect
®
ENGLISH
.
®
enabled music
®