as Schwabe 46978 Mode D'emploi page 3

Please Read the Instruction Carefully Before Use
General
 The infrared-induced lamp has an infrared detector with it.
When the thermal body moving in the darjness.
The detector will light the lamp automatically and turn off
after a period of time set in advance.
 The lamp can not be used if the anti-knock cover is
not installed.
Operation
Light sensor adjustment „LUX" (16)
Adjust the light sensor "LUX" control on the bottom
of the PIR to required level
Sensitivity adjustment „SENS" (17)
Adjust the sensor head and "SENS" control on
the bottom of the PIR to achieve desired coverage
(Max sensing angle 120° 1-12m range)
Time adjustment „TIME" (18)
Adjust the "TIME" control on the bottom of the PIR
to required duration
(Min - 10 seconds Max – 4 Minutes)
Notes
 Hot air movement such as the discharge from a vapour
cap or dryer and gusts of wind can cause the lamp
to switch on when it is not required to do so.
 Passing cars (heat engines) can also cause the lamp
to switch on.
 If the lamp is placed under a roof of trees.
The lamp will burn sometime during daylight hours.
 If the lamp does not work.there maybe some trouble with electrical.
 The lamp will not work satisfactorily if it is fixed in such a way that the detection range is not walked through.
 If the temperature difference between the object to be detector and surrounding area is too small
（in the summer, for example).The detector will react later and the range of detection will be 6 meters.
Specifications
Solar Panel: Polykristall 3,5W, 14,5V, 3m Verbindungskabel
Battery: Li-Ion 7,4V / 1800mAh
discharging time: ca. 1,3 Std
charging time ca. 10 Std
Luminous flux: ca. 550Lm
color temperature: ca. 5.000K
life time LED: ca. 25.000Std
sensibility adjustable: 5 LUX - 20.000 LUX
beam angle: 120°
detection range: max. 12m
time adjustable: 10 Sek - 4 Min.
as - Schwabe GmbH · Hummelbergstr. 6 · D-72184 Eutingen · www.as-schwabe.de
English
1 wall anchors (9mm)
2 wall screws (6x40mm)
3 mounting bracket
4 hinge joint
5 spring washer
6 flat washer
7 retaining screw
8 solar power socket
9 PIR sensor
10 anti-knock cover
11 ON-/ Off-Switch
12 solar cell
13 screws 4x34mm
14 solar cable plug
15 wall anchors (6mm)
16 rotary control „LUX"
17 rotary control „SENS"
18 rotary control „TIME"